Standard Number Of Turns

10-turn

Standard Resistance Range

100Ω~50KΩ

Max. Practical Resistance Value

150KΩ

Total Resistance Tolerance

Standard Class ±3%(H), Precision Class ±1%(F)

Independent Linearity Tolerance

Standard Class ±0.2%, Precision Class ±0.1%, (Within 5kΩ) (±0.15%)

Power Rating

2.0W

Noise

<100ΩE.N.R.

Electrical Travel

3600°±5°

Mechanical Travel

3600°

Insulation Resistance

>100MΩ(1000V.D.C.)

Dielectric Strength

1分鐘(1000V.A.C.)

Starting Torque

<5mN•m(50gf•cm)(Bushingmount type)、<3mN•m(30gf•cm)(Servomount type)

Stopper Strength

Approx.0.9N•m(9kgf•cm)(Bushingmount type)、Approx.0.6N•m(6kgf•cm)(Servomount type)

Resistance Temperature Coefficient

±20p.p.m./℃

Mass

Approx.25g

Special turns

3-turn type (S20HP-3S)

Special resistance value

Lower resistance values (10Ω , 20Ω , 50Ω )

Special shaft type

Shaft with front and rear extension (Rear shaft with 2mm dia. and 10mm length), special machining on the shaft, shaft dia. (φ 6.35mm) ＆ bushing with inch dimension

Special housing case

Simple sealed housing (except servomount type)

Special accessories

Slipping-clutch incorporated type (S20HP-10S-1782, 20mN?m ～ 60mN?m)

Special adaptor

With a limit-switch adaptor

Special terminals

With pin terminals for p.c. board (20HP-5P, 20HP-10P)

Special tap

Extra tap (Available up to 1 tap)

Special gangs

Multi-ganged (Available up to 2 gangs)